How To Seal the water leaking Bath Tubs?

How To Seal the water leaking Bath Tubs? - Hei, Welcome To Xivan Post Blog, In this page, I Will inform you about How To Seal the water leaking Bath Tubs? , I hope you can enjoy reading this Article Handyman, it's the result of automatic content collection, To remind these info on the post review How To Seal the water leaking Bath Tubs? it's advisable to be distributed to social media, I hope Helpful, view more clearly direct the info below.

10 July 2018
 
Bath Tubs are one common item found in Condominium and many apartments in Singapore. Very often, they will leak due to bad workmanship in the installation work. Seepage water will often find its way to the neighbor living downstairs, causing damages to their ceiling and ceiling works. This article will describe how one could seal this water leak.
 

Why Water Leaks? 

1. Bath tub has only one outlet at the bottom, the drain outlet. Usually, this drain outlet will not leak unless the water seals are not installed properly or the rubber seal or gasket is old and damaged.

2. Water can also seep through silicone seal or gap between the brick wall and the bath tub.  The traditional way of just using silicone glue to seal the leak would work for a few years;  after which,  it would have to be changed or renewed. 

 

What’s Needed for the Repair? 

 One will need

1. A tube of silicone sealant that cost about SGD$ 3/= and a silicone application gun from any local hardware store as shown

2. Some industrial cleaning fluid like paint thinner  & some duct tapes

3. One length of 20mm x 20mm PVC or aluminium angle trimming also available from the stores

How to Repair? 

1. Water leakage from the drain outlet 

a) First remove the centre screw that hold down the tub basket and remove the basket.

b) Clean up all the debris as much as possible using soap and water. Let to dry or dry it up using tissue or clean cloth.

c) Apply as much silicone sealant to the underside of tube basket and the rubber gasket, filling up any void if possible.

d) Fit the tub basket into position and tighten the nut. Wipe off any left over silicone sealant.

 2. Water leakage from the edge of the bath tube 

a) Remove all existing silicone or glue from the wall and the bath tube and clean up using industrial thinner

b) Cut the trimming using a cutter or saw so that it will fit properly all around the bath tub

c) Apply as much silicone sealant to the gap between the wall and bath tube shown and also the underside of the 20mm x 20 mm angle trimmer

 d) Press fit the trimming onto the wall and bath tub using duct tape

More on this Topic :

Similarly, the discussion about the article How To Seal the water leaking Bath Tubs? , Hopefully with such a short review on the post How To Seal the water leaking Bath Tubs? this, You've really find information about what is needed now. If you feel bermanfaatt with their reviews here, do not forget to distribute to the people closest to you, the info service facility Share Share Facebook and Twitter are available on this site.

This time you're reading an article with the title How To Seal the water leaking Bath Tubs? with a url link address https://xivanpost.blogspot.com/2018/07/how-to-seal-water-leaking-bath-tubs.html thanks for reading and do not forget to read the other reviews as well.