Clearing Water Clogged in Unreachable Pipe

Clearing Water Clogged in Unreachable Pipe - Hei, Welcome To Xivan Post Blog, In this page, I Will inform you about Clearing Water Clogged in Unreachable Pipe , I hope you can enjoy reading this Article Handyman, it's the result of automatic content collection, To remind these info on the post review Clearing Water Clogged in Unreachable Pipe it's advisable to be distributed to social media, I hope Helpful, view more clearly direct the info below.


28 March 2017


We renovated our kitchen and found ourselves  in a difficult situation where we could not  reach the outflow pipe to clear the water clog caused by sludge.   Here is how we resolve it.


What happened?


Our old kitchen layout allowed us to remove the cupboard that is sitting ontop of the floor trap.  With the cupboard removed,  we could lower one of our hands to reach the outflow pipe where to could insert a hard spring rod or guide the pipe cleaner wire so that it could thread the pipe trap to reach the outflow pipe as shown



After renovating the kitchen,  we fixed the kitchen cabinet ontop of the floor trap.  We allowed an opening of about 13 inches wide,   just  enough to reach the top of the floor trap to insert something hard to clear the vertical pipe.



During one water clog,  we found the outflow pipe choked again.  We could not use the pipe cleaner nor any  hard spring rod as we no longer able to use our hand to reach the inlet of the outflow pipe.  The next available option opened was to reach the pipe trap from the lower floor which is about 12 feet below us.


The Solution


After going through our workshop to get some ideas,  we found a piece of 20 mm PVC pipe in which we managed to bend the end of the pipe to form a curve bend as shown.

With that piece of PVC pipe,  we could then guide the wire of our pipe cleaner from the top of the floor trap and threaded through the pipe trap to reach the choked outflow pipe.

  


4 Sept 2017 update

The head of the pipe cleaner is usually expanded from the spring wire.  Sometimes,  the head is too small to clear the sludge completely in large pipes.   Soon after cleaning,  the pipe will be clogged again.

The solution is to attach a cutter to the head as shown



The cutter was formed by cutting a length of 60 mm long 20mm PVC pipe with one end of it splitted and opened as shown.  The cutter must be attached to the  pipe cleaner with metal wires,  making sure it  will not be detached during the cleaning process.


More on this Topic :




Similarly, the discussion about the article Clearing Water Clogged in Unreachable Pipe , Hopefully with such a short review on the post Clearing Water Clogged in Unreachable Pipe this, You've really find information about what is needed now. If you feel bermanfaatt with their reviews here, do not forget to distribute to the people closest to you, the info service facility Share Share Facebook and Twitter are available on this site.


This time you're reading an article with the title Clearing Water Clogged in Unreachable Pipe with a url link address https://xivanpost.blogspot.com/2017/03/clearing-water-clogged-in-unreachable.html thanks for reading and do not forget to read the other reviews as well.