Modifying Dell Monitor’s Stand for Non Vesa Monitor - Hei, Welcome To Xivan Post Blog, In this page, I Will inform you about Modifying Dell Monitor’s Stand for Non Vesa Monitor, I hope you can enjoy reading this
Article computer, it's the result of automatic content collection, To remind these info on the post review Modifying Dell Monitor’s Stand for Non Vesa Monitor it's advisable to be distributed to social media, I hope Helpful, view more clearly direct the info below.
5 May 2018
The new Dell SE2417HG LED Monitor is non Vesa; meaning, it does not have the usual 4 mounting holes at the back cover to fit Vesa wall mounting bracket or the Vesa stand. The usual way is to purchase special non-VESA adaptor kit shown as follows
This article will describe one way to modify the existing stand of SE2417HG to fit into the old Dell 2407 wfp stand. The same method can also be used to fit into wall mounting brackets
What's Needed?
1. The usual tools such as flat end screw drivers, Philips screw driver, electric drills and other necessary mounting screws etc
2. 2 pieces of metal extension bar
How to Modify?
Carefully ply open the casing of the original stand using a flat end screw driver, starting from the bottom side of the stand as shown by the red arrow.
When the casing's bottom end opened up, use a small screw driver to carefully ply open the bottom cover away from the top cover, working around the edges, giving way to clear the fragile clips. In the process, making sure no force will be applied to the clips or they will break easily.
Once the cover is opened, remove the 6 screws that hold the metal plate to the stand as shown
Now untighten the 2 side nuts as shown and take note how the washers etc were arranged.
Flip the metal plate over and install the metal extension bars as indicated so that the mounting bracket will clear the back cover of the monitor when it is mounted.
Remove the rotating plate from the old Dell 2407 stand. Drill and tap 4 nos of M4 threaded hole to mount the assembly onto the old stand as shown
Lastly, fit the whole assembly including the metal plate back to the old Dell 2407 wfp stand.
Similarly, the discussion about the article Modifying Dell Monitor’s Stand for Non Vesa Monitor, Hopefully with such a short review on the post Modifying Dell Monitor’s Stand for Non Vesa Monitor this, You've really find information about what is needed now. If you feel bermanfaatt with their reviews here, do not forget to distribute to the people closest to you, the info service facility Share Share Facebook and Twitter are available on this site.
This time you're reading an article with the title Modifying Dell Monitor’s Stand for Non Vesa Monitor with a url link address https://xivanpost.blogspot.com/2018/05/modifying-dell-monitors-stand-for-non.html thanks for reading and do not forget to read the other reviews as well.
