Service tool V3400 for resetting Canon printers counter - Hei, Welcome To Xivan Post Blog, In this page, I Will inform you about Service tool V3400 for resetting Canon printers counter, I hope you can enjoy reading this
Article canon, it's the result of automatic content collection, To remind these info on the post review Service tool V3400 for resetting Canon printers counter it's advisable to be distributed to social media, I hope Helpful, view more clearly direct the info below.
MAJ13/02/18
The Service Tool V3400, and service tool V3600, allow you to reset the waste ink pad counter on some Canon printers:
You can solve the messages errors "Waste Ink Tank Full" or "Waste Ink Pad Full", "error 5B00" or "Error P07" on these printers:
- Canon Pixma iP2700, iP4800, iP4810, iP4840, iP4850, iP4900, iP4910, iP4940, iP4970, iP4980, iP4990, iP5810, iP5880
- Canon Pixma MP230, MP240; MP250; MP260; MP270; MP280; MP480; MP490; MP540; MP550; MP560; MP620; MP630; MP640; MP980; MP990;
- Canon Pixma IX6500, IX6510, IX7000
- Canon Pixma IP3600, IP4940
- Canon Pixma PRO9000, PRO9500
- Canon Pixma MG2120. MG2140, MG2240, MG2250, MG2440, MG3240, MG3140, MG4100, MG4140, MG5140, MG5150, MG5240, MG5340, MG6140, MG6240, MG8140, MG8240
- Canon MX397, MX320, MX330, MX370, MX860
- etc
Where can you download the Service Tool V3400 ?
It is free here:
There is too a paid version here:
- V3400 Canon Service Tool for all iPxxxx series, iX series, MGxxxx series, MP series printers maintenance and reset.
How using the Service Tool V3400 ?
1- Dowload and install the Service Tool Canon V3400
2- Enter in maintenance mode with the printer:
- Power off the printer
- Connect the printer to the central unit with an usb cable
- Hold on the "Resume" button (triangle in a circle) et press "Power"
- Hold on these two buttons until the led power lights.
- Release the "Resume" button, but not the power button, and press 5 times "Resume".
- Release the two buttons. Leds will flash, wait until it stops. Now you are in Maintenance Mode
3- Run the Service Tool V3400
4- Choose the right USB port in "USB PORT"
5- In the section "Ink Absorber Counter", choose "Main"
6- In the section "Counter Value" (%) choose the number the closest of the counter number and clik on "SET" (The counter number is in the section "EEPROM")
Troubleshooting:
- Error 002: a fonction is not supported by the printer
- Error 005: The printer is not compatible with this Service Tool
- Error 006
- Service tool V3400 inactive
Similarly, the discussion about the article Service tool V3400 for resetting Canon printers counter, Hopefully with such a short review on the post Service tool V3400 for resetting Canon printers counter this, You've really find information about what is needed now. If you feel bermanfaatt with their reviews here, do not forget to distribute to the people closest to you, the info service facility Share Share Facebook and Twitter are available on this site.
This time you're reading an article with the title Service tool V3400 for resetting Canon printers counter with a url link address https://xivanpost.blogspot.com/2016/02/service-tool-v3400-for-resetting-canon.html thanks for reading and do not forget to read the other reviews as well.
